Vag Eeprom Programmer 119 BEST Crack
DOWNLOAD https://urluss.com/2ty8oW
How to Use Vag Eeprom Programmer 119 Crack to Correct Mileage, Read Login and Clear Errors on VAG Cars
Vag Eeprom Programmer 119 Crack is a software tool that allows you to program the EEPROM (Electrically Erasable Programmable Read-Only Memory) of various VAG (Volkswagen Group) cars via the K-Line adapter. It can be used for mileage correction, reading a login from Immo, collecting SRS Airbag errors, reading and collecting error codes on VAG cars. It works through the vehicle diagnostic port and supports most VAG models from 1990 to 2004.
In this article, we will show you how to use Vag Eeprom Programmer 119 Crack to perform some common tasks on your VAG car. You will need a KKL interface (blue) from old Vag-Com RS-232 or a USB to Serial adapter, a laptop with Windows XP or higher, and the Vag Eeprom Programmer 119 Crack software. You can download the software from the link below:
Vag Eeprom Programmer 119 Crack Download
Before you start, make sure you have the correct drivers for your KKL interface or USB to Serial adapter installed on your laptop. You can find them on the internet or on the CD that came with your device. Also, make sure you have a good battery voltage on your car and turn off any other devices that may interfere with the communication.
How to Correct Mileage on VAG Cars with Vag Eeprom Programmer 119 Crack
One of the main features of Vag Eeprom Programmer 119 Crack is the ability to correct the mileage on your VAG car. This can be useful if you have replaced your instrument cluster or if your mileage has been tampered with by someone else. To correct the mileage, follow these steps:
Connect your KKL interface or USB to Serial adapter to your laptop and to the diagnostic port of your car. The diagnostic port is usually located under the dashboard on the driver's side.
Run the Vag Eeprom Programmer 119 Crack software and select your interface type (USB or COM) and port number from the settings menu.
Select your car model and year from the list and click on \"Connect\". The software will try to communicate with your car and read some information from it.
Click on \"Mileage\" and enter the new mileage value you want to set in kilometers. You can also use the calculator button to convert miles to kilometers or vice versa.
Click on \"Write\" and wait for the software to write the new mileage value to your car's EEPROM. You may see some progress bars and messages on the screen.
When the process is finished, you will see a confirmation message saying \"Mileage written successfully\". You can then disconnect your interface and turn off the software.
Start your car and check if the new mileage value is displayed correctly on your instrument cluster. If not, you may need to repeat the process or try another car model or year from the list.
How to Read Login from Immo with Vag Eeprom Programmer 119 Crack
Another useful feature of Vag Eeprom Programmer 119 Crack is the ability to read the login code from the immobilizer system of your VAG car. The login code is a four-digit number that is required to access some advanced functions of your car, such as programming new keys or changing some settings. To read the login code from Immo, follow these steps:
Connect your KKL interface or USB to Serial adapter to your laptop and to the diagnostic port of your car.
Run the Vag Eeprom Programmer 119 Crack software and select your interface type (USB or COM) and port number from the settings menu.
Select your car model and year from the list and click on \"Connect\". The software will try to communicate with your car and read some information from it.
Click on \"Immo\" and wait 061ffe29dd